CA-500.210
Apply the adhesive from the trading unit or by means of a CA-dosing unit onto one side. Immediately after application, the workpieces must be fit together and pressed until they reach the required functional strength. To reduce the pressing times, or to accelerate curing of cyanoacrylate adhesives in thicker bonded joints >0.10 mm, the accelerator COSMO® SP-860.120 is to be used.
€ 4,95 ex. btw
Related products
-
Fixing material
Staples 15 mm, For fixing on plaster, BA13 plasterboard or wood, Box of 7,200 pieces
€ 30,10 ex. btw
| Base Modified | cyanoacrylates |
|---|---|
| Cone-plate viscosity (300 s-1) at +25 °C | approx. 20 mPa.s |
| Density according to EN 542 at +20 °C | approx. 1.05 g/cm3 |
| EPDM/EPDM bond strength – profile seal | approx. 6 s |
| Hard PVC/rigid PVC bond strength | approx. 9 s |
| Gap Bridging | max 0.1mm |
| Curing time at +20 °C, 50 % r. v. | approx. 16h |
| Softening area | from +80 °C |
| Glue and substrate processing temperatures | from +5 °C to +30 °CSpecial properties |
Special features
- fixes
- glues in seconds
- fast adhesion for assembly work
- good adhesion properties on various substrates
- solvent free good wetting of the substrates
- hard adhesive joint
- short fix time
- good UV stability
- high resistance to cold and heat
| Weight | 0,025 kg |
|---|---|
| Dimensions | 4 × 1 × 1 cm |
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.